Port RS232 RS485 GSM Remote Terminal Unit IP30 Housing Http Post Protocol

GSM M2M module for M2M connection solution and monitoring

System Feature

• Cortex M3 32-bit ARM
• Reliable performance with built-in double watchdog, 24×7 operation
• Dual digital filters for anti-noise
• Support automatic network reconnection and data re-send
• Automatically or manually update interior clock by sms or NTP or server
• Can set multiple timers(second, minute, day, week, month) to execute actions, e.g. output, upload data, change setting
• Event-based linkage programming, e.g. alarm linkage output
• Easy used GUI configure software for setting up to 100 parameters
• Optional inside battery that life is 8-20 hours, cellular module Intelligent sleep when power lost

DI feature

• Accept NO or NC dry contact

DO(T) feature

• Transistor output(drive voltage=power supply voltage, Drive current≤500mA)
• DO can be activated by remote or local schedule
• Remain down status when power lost

DO(K) feature

• Relay NO output(load: 2A / 125VAC,220VDC)
• on/off/pulse DO by remote control or local event
• Remain down status when power lost

AI feature
Standard 4-20mA (option: 0-5V) signal in, Sampling frequency: 33Hz, 10-bit precision)
Convert signal to actual measure value,support adjustment
Configurable parameters for signal acquisition, alarm, data communication
Sensor disconnect alarm

SMS feature

• Preset 10 phone numbers (support distribute authority to receive sms)
• Sms alarm when any IO channel triggered or out of preset normal range
• Editable alarm and recover sms with time stamp
• Remote get device status or value by sending sms command
• Activate output by sending sms
• Configurable schedule for sms report IO channel's status or value
• Sending sms command to update setting
• Forward simcard overdue sms to admin
• Support power lost sms alarm and recover sms(works with inside battery)

Wireless network communication

• Option network: cellular(2g/3g/4g) or Wi-Fi
• Communicate with up to 4 servers(IP or domain) by TCP/IP
• Automatically Upload data when alarm or according to schedule
• Communication protocol: Modbus TCP,http post, Cwt_IO(two-way communication)
• Can forward data between wireless network with RS485 or RS232

Modbus feature

• Can work as a modbus master to poll salve over RS485
• Can be a I O module to be read/write by modbus master
• As modbus to gprs/3g gateway

TI feature

• Option temperature probe or temperature&humidity probe, support alarm, interlock, data communication
• Can switch ℃ or οF
• Detect probe connect or disconnect to alarm

machine to machine gateway

m2m management system

Port RS232 RS485 GSM Remote Terminal Unit IP30 Housing Http Post Protocol Images